Project: the boys Homelander Never meet your heroes_Front_170x240.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
If changing size . . . only change X and Y, not Z.
The Model is 169.81x240.19mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 3mm
Filaments Used:
PLA Sunlu Blue Transmission Distance: 4
PLA Creality Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Blue
At layer #8 (0.72mm) swap to Black
At layer #10 (0.88mm) swap to Red
At layer #19 (1.6mm) swap to White for the rest.