Project: The boys poster blue_Front_166x240.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

If changing size . . . only change X and Y, not Z.

The Model is 165.55x240.29mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.9mm

Filaments Used:
PLA Creality Black Transmission Distance: 0.6
PLA Sunlu Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue
At layer #14 (1.2mm) swap to Blue Gray
At layer #21 (1.76mm) swap to White for the rest.