Step and f3d File Included! if you have Fusion 360 Use the f3d File.

(The Rolls in the pictures can Look Different Because i Made some Improvements)

Wanted one cable roll for one color instead of 4x 25m rolls for a color, so I made this cable roll where I can add as much as I want.
You can stack the rolls on top of each other, you have to glue the "stack Dot's" on one side of the roll.

I also made a Spool Rolling helper, just push it in one end of the roll and put it on something like a Cordless drill.

Made them to look like small Filament Rolls with holes where you can secure the cables after you used it

if you want to Make some changes, i included a Step and f3d file (use f3d if you use Fusion 360)

Best is if you glue the rolls together

The Normal spool is Made for 0,14 mm² (Outside Diameter Ø 1,1 mm) Wires.
If you live in Germany, you can order them here: https://www.pollin.de/p/schaltlitze-liyv-0-14-mm2-560370

The Small Spools are Made for these Wires. i used them for my Slime Vr Project.
https://de.aliexpress.com/item/33027953616.html?gatewayAdapt=glo2deu

And That's the Shrinking Tube i use, Tested From Ø 1mm - Ø 5mm
https://de.aliexpress.com/item/1005002462892713.html?gatewayAdapt=glo2deu

(Sorry for my bad English)

Donate if you want, need more Filament for other Projects/Prototypes ;)