HUEFORGE PORSCHE 18

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Red Transmission Distance: 5

PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 2

PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions: Start with Red

At layer #14 (1.2mm) swap to Black
At layer #16 (1.36mm) swap to Gray
At layer #19 (1.6mm) swap to White for the rest.