Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Blue
At layer #7 (0.64mm) swap to Black
At layer #11 (0.96mm) swap to Red
At layer #16 (1.36mm) swap to Orange
At layer #20 (1.68mm) swap to Skin
At layer #28 (2.32mm) swap to White for the rest.
Filaments Used:
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Skin Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 6 unique filaments
With this creation it is possible to create a watch with an internal diameter of 190 mm. The base for the watch is found in makeworld.