AS ROMA LOGO BANDIERA
AS ROMA LOGO BANDIERA
Print Profile(0)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Esun nero Transmission Distance: 5
PLA+ IIID Max Red Transmission Distance: 4
PLA+ IIID Max Yellow Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with nero
At layer #6 (0.56mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #24 (2mm) swap to Red for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
