Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 1.8mm and the Actual Depth is 1.8mm

Filaments Used:
PLA+ Numakers Black Transmission Distance: 0.3
PLA+ Numakers Royal Blue Transmission Distance: 3.2
PLA+ Numakers Nuclear Red Transmission Distance: 4.8
PLA+ Numakers Grass Green Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Royal Blue
At layer #11 (0.96mm) swap to Nuclear Red
At layer #12 (1.04mm) swap to Grass Green for the rest.