Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Starlight Neptune Transmission Distance: 1.5
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #14 (0.76mm) swap to Starlight Neptune
At layer #17 (0.88mm) swap to Red
At layer #21 (1.04mm) swap to Grey
At layer #22 (1.08mm) swap to White for the rest.