V2 - Tall Mini Impossible Vortex Passthrough by RJ Design

RJ Design

Art>Sculptures

GIF

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.9 h

1 plate

4.7(85)

150%

2.8 h

1 plate

5.0(1)

0.2mm layer, 2 walls, 15% infill

4.2 h

2 plates

0.12mm layer, ironing, inner part scaled 99.25% X and Y axis

2.7 h

1 plate

Open in Bambu Studio

Boost

335

473

145

1.2 k

943

Released

Description

The Design

Here's a new Tall mini version of the impossible passthrough!

Fully Compatible with the V2- Mini Vortex Thread (see end of gif)

The “male” part of the thread seems to defy physics by passing through the slightly larger “female” Part

This is a fun piece and can be used as a fidget toy as well

Dimensions are approximately: diameter 32mm x 60mm

Let me know if you experience any issues.

If you enjoy this print consider giving it a boost (It'd really help me out!)

Printing

Standard settings should work fine to slice. Ensure Auto Tree supports with 30 degree angle is used (to support the top section of the outer piece)

Once printed let the build plate cool before trying to remove.

My Work

After many years in Engineering, I've just decided to try and follow my childhood dream of becoming of a Creative Designer.

A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that's where I'm going to focus my efforts.

Boosts really help me out

To support me even more (not ever required), for information around development of my models (background to come) and for commercial use, i've started a patreon here:

https://www.patreon.com/RJ_Design

Comment & Rating (145)

@user_292230554

Boosted

Nice Work. Mine didn't slide flawlessly but still very nice work

(Edited)

The designer has replied

@RJDesign

that's frustrating, could you try different filament? it should slide fine and then loosen up a bit the more it is used

@Replicatorator

Boosted

Replying to @RJDesign :

yeah, used it a bit, then you see a fast improvement :D

@dugy58

Print Profile

0.2mm layer, 2 walls, 15% infill

I like the taller ones. they show both colors better. this came out perfect. thank you.

The designer has replied

@RJDesign

Very Nice!

@LabRatt

Print Profile

0.2mm layer, 2 walls, 15% infill

Pretty cool print!

The designer has replied

@RJDesign

Thank you!

@Tylonal

Print Profile

0.2mm layer, 2 walls, 15% infill

This was my very first print ever, and it came out flawlessly on my P1S.

The designer has replied

@ariabyss

congrats and welcome to the community!

@RJDesign

Looks Great!

@mako3d

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice

The designer has replied

@RJDesign

Thanks!

@LuisArmas

Print Profile

0.2mm layer, 2 walls, 15% infill

Excelente!! Funciona 10/10! Imprimí con soporte balsa ara que saliera bien ya que el primer intento una pieza se despegó de la cama.

The designer has replied

@RJDesign

Feliz de que lo hayas hecho funcionar

@Dr.Taly

Boosted

nice

@Johann_Solo

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice print on my a1 mini with microcenter blue PLA. it easily slips through both ways.

(Edited)

The designer has replied

@RJDesign

Thanks!

@alex717

Print Profile

0.2mm layer, 2 walls, 15% infill

Very cool and mesmerizing

The designer has replied

@RJDesign

Thanks!

@How2Texan

Print Profile

0.2mm layer, 2 walls, 15% infill

a little tight

The designer has replied

@RJDesign

Keep playing with it and it should loosen up

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.