EASY Bambu Spool Winder NO EXTRA PARTS NEEDED! Remixed by Mentuis

Remixed by

Mentuis

3D Printer>3D Printer Accessories

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

7.2 h

1 plate

4.9(22)

A1 Mini - 2 Plates

Designer

7.5 h

2 plates

4.0(5)

Slim Spacers For Thicker Spools

Designer

46 min

1 plate

Open in Bambu Studio

Boost

210

367

385

226

Released

Description

Remix of B-Lab 3D's simplified spool winder.

His goal was to make an all printed spooler that didn't use a ton of filament. The design is fantastic! Easier and faster than the other solutions out there, this spooler has been a game changer.

I made a couple changes to optimize it for winding Bambu Lab spools:

Increased the width of the spacers as the original was too slim to hold Bambu spools correctly.
Changed the thread of the bolt and nut to make it much easier to use.

I have uploaded three profiles:

All parts on one plate for X1C/P1S/P1P/A1.
Parts split between two plates for A1 Mini.
Slimmer spacers, ideal for many other brands of spools.

Huge thanks to B-Lab 3D for the awesome design:

https://makerworld.com/en/models/17838#profileId-37536

Comment & Rating (40)

@Gmoney316

Boosted

can u still use drill with this or only the crank handle

The designer has replied

@mentuis

Works great with a drill. I use an electric screw driver, harder to keep the drill at a reasonable speed.

@Gmoney316

Boosted

Replying to @mentuis :

thanks just need something simple. new to 3d own my x1 for about a month and venturing out got some overture silk pla coming on cardboard.

@mentuis

Replying to @Gmoney316 :

this should be perfect for despoiling it. You’re going to have a lot of fun with this hobby, it’s addicting.

@Brawntfxx

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

if you are looking for a spooler that isn’t a project in itself. Then this is your spooler. thanks for the model

The designer has replied

@mentuis

Thank you so much!

@ByteFax

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice , all printed in PETG

(Edited)

@TacMac

Print Profile

0.2mm layer, 2 walls, 15% infill

great way to use up some PETG I wanted to get rid of. worked great.

@user_949221292

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print! Simple and good concept.

@user_3341828765

Boosted

what material is best for this ?

The designer has replied

@mentuis

I have only printed it in BL Basic PLA and haven’t had any issues with strength or printing. PETG should also be a great fit for it.

@dcvdesigns

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Tolerances are pretty tight on the screw, but as it gets worn in, it's better. Broke the first one trying to tighten it...

@DJKWIX

Print Profile

0.2mm layer, 2 walls, 15% infill

pretty cool little respool design. nothing fancy. just gets the job done. I am glad i got a chance to print it. I used it a few times already and actually gave it to a friend of mine. I can always print another one. hahaha