Bambu Lab spools winder SIMPLIFIED !
Copyright Claim
Bambu Lab spools winder SIMPLIFIED !
Boost
676
1310
784
Print Profile(8)
0.2mm layer, 2 walls, 15% infill
Designer
5.2 h
1 plate
0.2mm layer, 3 walls, 25% infill
Designer
2.1 h
1 plate
0.2mm layer, 2 walls, 25% infill PETG
7.7 h
1 plate
Moved to two plates sized for A1 mini
6.8 h
2 plates
Click to see more
Open in Bambu Studio
Boost
676
1310
784
42
3.4 k
4.1 k
Released
Description
Hi, I needed to bring some filament onto AMS compatible spools, I've seen excellent projects around but too complex and expensive, I don't want to waste filament, time and money buying bearings, screws or anything else.
Simplifying as much as possible and without needing anything else apart from a printer, I designed this. Simplicity is fundamental for me! you can use the crank, or a screwdriver on the removable pin.
WARNING: for the unwinding spool I use an open filament dryer, otherwise print the parts 2 times to have a complete set
If you are interested feel free to bring updates, I left
consider this alternative with AMS Lite: AMS Lite Spool Winder by B-Lab 3D - MakerWorld
HAPPY PRINTING EVERYONE :D
Comment & Rating (784)
All
Print Profile
0.2mm layer, 3 walls, 25% infill
Work properly.
Printed on PETG, easy and simply to use.
The designer has replied
3
Reply
grazie per il tuo supporto, sono davvero contento che tutto sia al giusto posto, felice stampa ☃️
(Edited)1
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
Works great
The designer has replied
2
Reply
grazie per il tuo bellissimo risultato, felice stampa 🚀
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
easy print on the X1C!
The designer has replied
1
Reply
ottimo risultato, grazie per aver supportato questo modello, felice stampa 🌈
0
Reply
Grazie mille per il design.
L'ho stampato con un infill al 25% con dell'Overture SuperPla+ estremamente resistente.
Come altri utenti mi stamperò degli spaziatori perchè al primo utilizzo con l'avvitatore avevo stretto troppo e creato troppo atrito :p vedi foto 2.
In ogni caso funziona benissimo !
The designer has replied
1
Reply
Grazie per il tuo supporto al modello, nella lista trovi tutti i diametri per gli adattatori, felice stampa 🌈
0
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
The model is good, sadly tronxy spool is narrower
The designer has replied
0
Reply
se possibile puoi caricare il modello per tutti... felice stampa 🌈
0
Reply
for anothers spools fit so good
0
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
fits nice and tight
The designer has replied
1
Reply
grazie per il tuo contributo al modello, felice stampa 🌈
0
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
perfect
The designer has replied
1
Reply
grazie 🤩, felice stampa ✅
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Easy way to respool. My base wasn't perfect, surface imperfections and the arms started to widen towards the top, but this was probably my fault. Made a little spacers to remedy the situation, functioned fine with those.
The designer has replied
1
Reply
grazie per il tuo supporto a questo modello, spero ti sia utile, felice stampa 🌈
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed 2 copies, printed well with PLA basic. used for unspooling Amazon PETG filament to a Bamboo lab spool to fit in AMS.
The designer has replied
1
Reply
grazie per aver supportato questo modello, spero ti sia utile, felice stampa 🌈
0
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
nice .work good
The designer has replied
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (3)
Click to see more
Related Models
© 2024 MakerWorld