Doudnikov

cover

IMG_3729_0cbfa5fd-493c-4b23-9633-e4d24ebdeea1.webp

plate_1.webp

IMG_3733_a9bb9e20-c693-490e-a355-ca1a2aec711b.webp

IMG_3731_8d5f0334-44d0-4ca9-88a1-666fa8c5dd86.webp

IMG_3732_2fcd25e2-e9de-48a5-9715-86843af26344.webp

IMG_3730_5227be51-3d7a-4875-ba17-d1714280783f.webp

plate_1.png

bbman

I have used this design on my Sunlu S1 dryer in the past, only the PTFE tube was pointed down since it was mounted on top of my printer. With the AMS on top of my printer now and my Sunlu next to my printer, I looked for a design that would feed more easily and found this design on MakerWorld. Printed and installed using an M6 PTFE connector.&nbsp;&nbsp;Pictures show my print with supports (removed very easily!), and installed in the Sunlu. The height was a bit off, I had to insert a few small washers between the part and the Sunlu, but it screws down nice and tight and the filament feeds easily. Quick and useful print for my, now occasional use, of my Sunlu dryer!

Standard 0.2mm layer, 2 walls, 15% infill with supports

Sunlu Filadryer S1 M6 PTFE fitting with screws, no drilling

Remixed a model and flipped the filament travel path.

Sunlu Filadryer S1 M6 & M10 PTFE fitting with screws, no drilling

Global

Print Profile(1)

Description

Comment & Rating (0)

This remix is based on

License

Related Models

SUNLU FilaDryer S1 Drybox Hygrometer Holder

Screw Holder for drill

SUNLU FilaDryer S1 Drybox Fan Holder

Silica Dryer Spool Insert