glasses Box /眼镜盒 by MingGY

MingGY

Tools>Organizers

In Contest

Beach & Pool Essentials

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

4.7 h

2 plates

5.0(17)

No icon - 0.2mm layer, 2 walls, 15% infill, A1 mini

2.9 h

1 plate

3.6(5)

with your own name on the box - 0.2mm layer, 2 walls, 15% in

3 h

1 plate

Open in Bambu Studio

Boost

278

479

438

222

Released

Description

这个眼镜盒模型是专为3D打印设计的。打印完成后，无需任何五金件即可直接使用。眼镜盒的设计简约时尚，既能保护您的眼镜，又方便携带和存放。无论是日常使用还是旅行携带，这个眼镜盒都是理想的选择。

特别提示：如果您觉得锁扣太紧，可以使用锉刀适当打磨锁扣部分，以获得更好的契合度。

This eyeglasses case model is specifically designed for 3D printing. Once printed, it can be used immediately without any hardware assembly. The eyeglasses case features a sleek and stylish design, providing both protection and convenience for carrying and storing your glasses. Whether for everyday use or travel, this eyeglasses case is an ideal choice.

Special Note: If you find the latches too tight, you can use a file to slightly sand down the latch area for a better fit.

Comment & Rating (26)

@i_eat_pla

Print Profile

No icon - 0.2mm layer, 2 walls, 15% infill, A1 mini

Well designed and prints perfectly in place, however this print profile does have an icon on it, even though it says it does not.

The designer has replied

@MagnetDanny

For some reason it had the wrong profile file, I'm sorry about that, fixed it now, many thanks for your feedback

@Staffo79

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great

@petrkilar

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice glasses case, thanks to the author for a great press profile.

@Tylonal

Printed great, and its solid - only issue I have is that its too small for my sunglasses (but it fits my regular glasses just fine). I will add a bit more depth next time and it would be good for both, but then the normal glasses might rattle a bit. I used some glow filament and I think it came out great! 9/10 Only thing that would make it better would be if there was some kind of male/female lip in the case lids, that fit into each other - that would help prevent dust from getting into the case (I live in the southwest USA and dust is a big problem).

@joseandalexpaez

Print Profile

0.2mm layer, 2 walls, 15% infill

printed great, glasses fit well. Thank you.

@tundra3866cda

Print Profile

0.2mm layer, 2 walls, 15% infill

Good model.

@user_3948639677

Do not print the version titled ‘No icon’ by MagnetDanny unless you want to be surprised by closing the box and finding ‘MagnetDanny’ permanently displayed on the top. However, by warning you, I’ve spoiled that surprise, so there’s no point in printing it at all now. Stick to the version provided by the designer.

(Edited)

@DylanPatel

You can delete or change the text on his "No Icon" version. He also uploaded a second version too,

@HAL2001

Print Profile

0.2mm layer, 2 walls, 15% infill

Great Design

@Morden

Print Profile

0.2mm layer, 2 walls, 15% infill

perfekt gedruckt

@bobbas

Print Profile

No icon - 0.2mm layer, 2 walls, 15% infill, A1 mini

Hinges cracked the instant I tried to close the box. The front clip's tolerance was too low as well, and it wouldn't click together. I suggest replacing the mechanisms from print in place to using filament or M3 bolts.