Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
The Model is 200x142.58mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Basic Red Transmission Distance: 4.2
PLA BambuLab Basic Yellow Transmission Distance: 5.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.6mm) swap to Red
At layer #20 (1mm) swap to Yellow
At layer #28 (1.32mm) swap to Ivory White for the rest.