Pentacle Fridge Magnet
Pentacle Fridge Magnet
Print Profile(1)
Description
A pentacle fridge magnet, supporting 5x2mm disc magnets.
Printing
This is made to be printed with its front side directly on the print bed with no supports with a 0.2mm layer height. I use an 0.4mm nozzle.
The profile I have provided here was used to produce the model in the above pictures with Extrudr NX-2 matte black and epic purple.
Magnets
For safety purposes I put a small amount of glue on a magnet before insertion. As the gap is tight to accommodate optionally using no glue, the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.
Support
If you like our work please consider joining our club on Printables!
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
