Impossible Vortex illusion - NEW Inner by RJ Design

RJ Design

Art>Sculptures

GIF

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 10% infill, Tree Supports

Designer

4.3 h

1 plate

4.6(47)

0.2mm layer, concentric top and bottom

2.6 h

1 plate

4.7(6)

0.18mm layer, 2 walls, 10% infill

4 h

2 plates

4.8(4)

Boost

189

305

751

501

Released

Description

The Design

Here we have a modified inner part for the Impossible Vortex Passthrough. The new outside from v2 is included on the build plate too.

It has the improved outer from v2 and a new inner section.

No more messy overhang, a good slide straight after printing, and much better bed adhesion.

This is a fun piece and can be used as a fidget toy as well

Dimensions are approximately: diameter 46mm x 50mm

Let me know if you experience any issues.

If you enjoy this print consider giving it a boost (It'd really help me out!)

Printing

The Print Profile should be used if possible. The hour glass object should have auto tree supports enabled to 30 degrees, and a layer height of 0.16mm, the barrel shape should have no supports and a layer height of 0.2mm

It is set up to print by object (1 part then the next)

My Work

After many years in Engineering, I've just decided to try and follow my childhood dream of becoming of a Creative Designer.

A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that's where I'm going to focus my efforts.

Boosts really help me out

To support me even more (not ever required), for information around development of my models (background to come) and for commercial use, i've started a patreon here:

https://www.patreon.com/RJ_Design

Comment & Rating (84)

@infamous61

Boosted

Print Profile

0.16mm layer, 2 walls, 10% infill, Tree Supports

Supports broke away cleanly and it fits togethera little tight, but from experience of other versions I know it will loosen up and slide freely after some use. Fantastic addition.

The designer has replied

@RJDesign

Thank you!

@user_2833490242

Boosted

Impressive is all I can for such a complicated model, it works well and looks "impossible".

The designer has replied

@RJDesign

Thank you!

@chunkahoy

Print Profile

0.16mm layer, 2 walls, 10% infill, Tree Supports

Hypnotizing.

The designer has replied

@RJDesign

Thanks!

@haidu.patrick

Print Profile

0.16mm layer, 2 walls, 10% infill, Tree Supports

I scaled it down to 70% and it required supports and a bit of edge cutting to make it work smooth. but that's on me, not on the publisher. amazing design and effect