Puzzle Box Lid - Minnie Mouse

This is a custom lid that works with the base of my puzzle gift box which can be found here:
https://makerworld.com/en/models/446736#profileId-353234

You can find the Minnie Mouse puzzle here:
https://makerworld.com/en/models/496974#profileId-411339

As well as my other puzzles and lids in this puzzle collection here:
https://makerworld.com/@CanadianGamer/collections/988102

***IMPORTANT***

If you slice my print profile you may get a warning about floating regions. You can ignore this, its due to the fact that we transition from 10% infill to 100% infill in the model.

My print profile for this lid has built in adaptive layers, so the lid itself will print with 10% infill at 0.2mm layer heights, but when it starts to print the hueforge topper, it will switch to 100% infill at 0.08mm layer heights. The Colour swaps are built into my print profile.

If you slice the STL yourself, you will need to set up the file and are responsible for your layer heights, colour swaps, and infill.

Minnie Mouse Puzzle Box Lid - Printing Instructions

Start with Black

At 3.48mm swap to Magenta

At 3.72mm swap to Sakura Pink

At 3.96mm swap to Ivory White for the rest.

---------------------------------------------------------------------------------------------------------------------

Commercial license's to sell my prints are available on my Patreon:

https://www.patreon.com/CanadianGamer3DPrintsEDM

As part of your membership you will also have access to exclusive files available only on Patreon.

---------------------------------------------------------------------------------------------------------------------