I get the new new Xtouch ESP32 board JC8048W550 from Aliexpress for the new 5 inch XTOUCH project from xperiments.

That is a remix of user jdlap13 - https://makerworld.com/en/models/211829

I set the connectors for the button, SD-Card and USB-C to the correct positions that need the JC8048W550 board. Also i make the case more flat. I create a stand that you can place the enclosure easily. Can`t wait till the first firmware will released.

Important: Currently (June 2024) there is no working firmware released. The project is still engineered from famous user xperiments-in on github.

When you insert the board, you must tilt the board otherwise you broke one of the switches on the board!!!! - Please check pictures.

Currently I do not how the battery button" (right down button) of theESP32 board worked. So i create two versions. On with button and on without button.

Later i will create a mount with magnets for placing the XTouch5 right near the stock LED display. So for me, a battery is currently not important.

You need small screws to mount the board on the cover case. Max.4 - 4,5mm long. If you use longer screws i comes out quickly at the front. The lid are fixed with 4 small screws approx 6mm long.

Here are some links: Board on aliexpress: https://s.click.aliexpress.com/e/_DBdoa6n
Github from experiments-in: https://github.com/xperiments-in/xtouch

Discord server with ongoing infos about the 5 inch XTouch: https://discord.gg/RytEDEgfR3