Plant Pot
Plant Pot
Boost
28
66
19
Print Profile(1)
50% scale, 0.28mm layer, 2 walls, 10% infill
2.2 h
1 plate
Boost
28
66
19
0
200
173
Released
Description
Designed a geometric plant pot for my cactus - actual stl is huge so you can scale it to size. The printed version you see is at 50% scale - printed on 0.2mm standard settings with a 0.4mm nozzle on the p1s. Took about 3hrs
Comment & Rating (19)
All
Nice one- Thanks
The designer has replied
1
Reply
that filament looks awesome!
0
Reply
Print Profile
50% scale, 0.28mm layer, 2 walls, 10% infill
The ridiculous length bridges made a mess of my nozzle. Canceled print
(Edited)
The designer has replied
0
Reply
Hallo jaelowen1,
thank you for your feedback. I have adjusted the infill to 10% to address the issue you're experiencing with your print.
best wishes,
Fredwood6000✌️
0
Reply
Shit, I was surprised about my print, wondering why the surface looked so bad afterwards on the inside. Then I increased the number of outer shells to solve my problem, but I didn't notice that it got so excessively out of hand.
0
Reply
Print Profile
50% scale, 0.28mm layer, 2 walls, 10% infill
will try the full size soon and probably more than 2 walls.
0
Reply
Print Profile
50% scale, 0.28mm layer, 2 walls, 10% infill
1
Reply
Print Profile
50% scale, 0.28mm layer, 2 walls, 10% infill
super 👍 hält gut das Wasser und sieht schick aus. allerdings in 85% Größe gedruckt.
0
Reply
scale 40% for ikea feska 2135
0
Reply
Print Profile
50% scale, 0.28mm layer, 2 walls, 10% infill
1
Reply
Print Profile
50% scale, 0.28mm layer, 2 walls, 10% infill
1
Reply
Print Profile
50% scale, 0.28mm layer, 2 walls, 10% infill
1
Reply
Print Profile
50% scale, 0.28mm layer, 2 walls, 10% infill
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld