This is a Wine/Beer glass rack that mounts under a cabinet or counter.

Three glasses will fit easily.

Printing

Very easy to print, just make sure the large flat faces face down.

Installation

I included a drill guide so you can mark the holes easily and perfectly parallel. I recommend pre-drilling before screwing these in. The holes are designed to acomodate no.8 wood screws (recommended size for pre-drilling 7/64). The width of the included drill guide is based on my own prefered spacing and allows the glass with the largest foot that I own to fit in the rack, smaller glasses also fit great at this spacing. Of course you can choose a different spacing if desired.

There is a left and right piece because the front side (The side you insert the glass from) is slightly tappered to allow for easier glass insertion.

Thanks for printing and enjoy!