The Model is 200x198.6mm in size
You may print at higher layer heights below the Min Depth of 1.3mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
    PLA Eryone hyper Black Transmission Distance: 1.6
    PLA Eryone hyper Red Transmission Distance: 9.6
    PLA Eryone Agate grey Transmission Distance: 4
    PLA Kexcelled White Transmission Distance: 5.6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #20 (1.68mm) swap to Red
    At layer #23 (1.92mm) swap to Agate grey
    At layer #30 (2.48mm) swap to White for the rest.