Butterfly storage box
Butterfly storage box
Boost
6
4
3
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
10.9 h
3 plates
Boost
6
4
3
0
2
1
Released
Description
I designed this butterfly box for my daughter.
I have the 3mf colored to resemble a monarch butterfly.
I have also provided the stl files. Feel free to color the butterfly box any way you wish. If you do color it yourself pay attention to the hinge. Parts of it have to be filled in with the appropriate colors. There is 2 images above to show the locations.
You will need 8 - 8×3mm magnets and glue for assembly. You will also have to put some glue on the end of the hinge pin.
When you print the hinge pin make sure it is set to 20mm Strength with the Brim type set to Outer brim only.
Comment & Rating (3)
All
The box is beautiful and well colored. Plate 3 (hinge) doesn't like to print upright because of how tall the hinge is, I will probably just use some type of metal rod as a replacement.
The designer has replied
0
Reply
Sorry to here that. Looking at the 3mf the hinge settings didn't hold. I had it set to 20mm Strenth with the brim type set to outer only. Sorry again. Hopefully this helps.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld