Project: gear5.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 78.8x140mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Pink Transmission Distance: 8
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA Hatchbox White Transmission Distance: 10
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Pink
At layer #11 (0.96mm) swap to Silver
At layer #12 (1.04mm) swap to White for the rest.