Remix of the Rubber Band Game by TobyStoe, made more portable. Additions include a storage/lid, new player boards to fit inside the lid, an upgraded board and a TPU band that can be used to hold it all together securely. The TPU band can be substituted with rubber bands as well. For game play, I would strongly recommend printing Rubber Replacement Connector Bridge as they are far superior to rubber bands and store well inside the lid.

New Parts:
1. Board with separate pegs that can be replaced if damaged. A rubber mallet or hammer can be used to insert the pegs and a screw driver and hammer can be used to remove damaged pegs. Printed in PLA+ Black Sparkle.

2. Player boards that fit on top of the game board for storage. Set the first 20 layers of the player board to be colored coded to the player pieces printed to go with it. The player boards and pieces are printed in PLA+ Black Sparkle, Red, Green, Yellow & Blue.

3. Lid/Storage printed in PLA+ Black Sparkle.

4. Band printed in TPU Black. There are 2 bands, one for 2 player boards and one for 4 player boards. Both secure tightly to allow no movement.

I printed everything on an X1C with AMS and had no need to print the player pieces as an object. I just printed a bunch at once without any issue at all. I printed everything with 4 Wall Loops, 5 Top/Bottom Shells. 15% infill and no supports on anything but the lid. I used normal supports for the lid strap overhangs, which should be reflected in the Per Object Settings for that part.

(This is my first upload of anything, so be gentle if there are errors while I learn ;) )