Easy to print and original key magnetic holder. The wall mount has holes for magnet slides - so its possible to remove magnets withoud destroying the part. Magnet slides are semi-tight fit and You may need pliers to remove them (or push them several times in and out to loosen it a bit.

Take care about magnet orientation - when inserting magnet into key chain pocket - so the key chain pocket and wall mount magnets stick together :D Otherwise the holder will not really work :D

Magnets needed:

Neodymium 12x3 mm - pretty normal dimension, You can buy it on Aliexpress etc. I tried also with 10x3, but attaching force didnt feel strong enough.

Each magnet slide holds 2 magnets - so You can either stick 2 pieces of 12x3mm or if You have 12x6mm, You can use that as well.

Key chain pocket needs 1 magnet.

So for full set You will need 18 pieces of 12x3 magnets.

If there is a strong request for other magnet dimensions, I can adapt the model and add it as well (if it fits the holes).

Enjoy and if You want to support me - just download my other models as well. Thanks!