Project: Link.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 215x215mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Paramount 3D Autobot Blue Transmission Distance: 2.5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Autobot Blue
At layer #14 (1.2mm) swap to Orange
At layer #18 (1.52mm) swap to Yellow
At layer #20 (1.68mm) swap to Beige for the rest.