Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Protopasta Black Transmission Distance: 0.5
PLA PolyTerra Army Blue Transmission Distance: 2.6
PLA PolyLite Temp Purple-Pink-Translucent (Cold) Transmission Distance: 9.2
PLA Protopasta Soda Green Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3
PLA PolyLite Polymaker Teal Transmission Distance: 5
PETG JAYO White Transmission Distance: 3.4
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Blue
At layer #7 (0.64mm) swap to Temp Purple-Pink-Translucent (Cold)
At layer #8 (0.72mm) swap to Soda Green
At layer #14 (1.2mm) swap to Savannah Yellow
At layer #15 (1.28mm) swap to Polymaker Teal
At layer #21 (1.76mm) swap to White for the rest.