Tired of having your prints turn out noting like the posted “photo”? Then you've come to the right spot, I only post photos of the actual print and not the file they were generated from.

If you have a request, want FREE*Patreon exclusive* models(like the ones below), or if you are interested in members only models and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D

IMPORTANT

I received some feedback that my thicker black base made prints take longer…So I've uploaded the variable layers that I print with(0.26mm for the first 4 layers) as well as the standard 0.16mm base layer. It should cut print time by +30%. Let me know if there are any issues.

Instructions

Filaments Used:

PLA Kingroon Black Transmission Distance: 0.4

PLA Overture Space Gray Transmission Distance: 1.4

PLA Overture White Transmission Distance: 4

PLA Overture Red Transmission Distance: 8.2

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #14 (1.2mm) swap to Space Gray

At layer #17 (1.44mm) swap to White

At layer #21 (1.76mm) swap to Black

At layer #23 (1.92mm) swap to Red

At layer #29 (2.4mm) swap to White for the rest.