Beetlejuice Snakehead Hueforge - I actually used glow-in-the-dark green instead of florescent green.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x252.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Glow-in-the-dark Green Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Green for the rest.
Comment & Rating (2)