A cute articulated Seagull.
Attention: I recommend downloading this project and manage your flushing volume as you prefer if you print this model in multicolor. White needs a lot of flushing to keep it clear on the print. I recommend to place as many seagulls as possible on the buildplate and placing additional “Filament purge” objects on the plate if possible to minimize waste (check the last picture for example).
You need to glue the beak to the body after your print is finished.
This model is: PRINT IN PLACE - NO SUPPORTS
Testprints:
A1 Mini with a 0.4mm nozzle printed in multicolor at 100% - 60% size
A1 Mini with a 0.4mm nozzle printed in single color at 100% size
Filament for the multicolor testprints:
Bambu Lab PLA Matte Ivory White (body)
Bambu Lab PLA Matte Charcoal (wings and tail)
Fillamentum PLA Melon Yellow (feet and beak)
This download is for personal and non-commercial use only. Don´t sell my designs or printed designs without permission.
If you want to sell your 3D-printed Neopyx3D designs you need a Neopyx3D - Vendor membership via Patreon:
https://www.patreon.com/Neopyx3D
Recommended Main Settings:
Layer height: 0.16
Infill: 15 % Gyroid
Supports: No Supports needed
Build Plate Adhesion Type: Outer-Brim with Brim-object gap 0.3
Printing Temperature and Cooling: depends on filament
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.