Shallow trays and spatulas for mixing epoxy glue.
These are printed with tear apart tabs for easy storage. The 12-tray stack fits in a 2x1 unit gridfinity bin.
These are designed to be printed on their handles to best utilize space. All the print profiles use “arachne” wall generator. Do NOT use the “classic” wall generator as the thin tear away tabs may not print, the spatulas will fall over and the print will then fail. After slicing you should see little tabs connecting all the trays and spatulas into one unit.
If you don't need the trays you can print the spatulas by themselves:
https://makerworld.com/en/models/491565#profileId-405093
I have also created deeper trays for larger volume. This print has 2 spatulas for each tray as well:
https://makerworld.com/en/models/491688#profileId-405224