Glue spatulas with deep trays for epoxy resin
Print Profile(9)
Description
Deep trays and spatulas for mixing epoxy glue. Each tray comes with 2 spatulas.
These are printed with tear apart tabs for easy storage. The 6-tray stack fits in a 2x1 unit gridfinity bin.
These are designed to be printed on their handles to best utilize space. All the print profiles use “arachne” wall generator. Do NOT use the “classic” wall generator as the thin tear away tabs may not print, the spatulas will fall over and the print will then fail. After slicing you should see little tabs connecting all the trays and spatulas into one unit.
If you don't need the trays you can print the spatulas by themselves:
https://makerworld.com/en/models/491565#profileId-405093
There's also shallow trays for smaller jobs, the orange ones in the photo below:
https://makerworld.com/en/models/491673#profileId-405212
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (252)