I found an X1C riser by TripleGWorkshop that was just what I needed to remix to add a shelf to contain the Wham Bam “The Cloud” fire extinguisher. I did not want it on the side panel because I have an air purifier installed.

The riser has just been made taller to accommodate the fire extinguisher, the left rear piece has an inset for screwing the shelf in place.

The shelf is secured in place by 2x#4 wood screws.

The top lip for the glass lid has 1mm thick by 5mm wide black foam tape applied to mimic the top lip of the X1C. The tap also prevents the glass from moving during print operations.

The download contains 2 types of shelfs. The first as pictured in the photos, has a complete full wall around “The Cloud”. This protects it from the Bowden tube rubbing on it when printing in the left rear quarter of the plate. The second has a small lip exposing “The Cloud” if desired.