The Multiboard Free-Standing Foot, but with a Desk Clamp underneath and above it, to be placed on a side of a table. You can have the board standing above and hanging below the table/desk! If you need any additional gap sizes, do comment below or DM me.

There is a single sided version where you can only put the boards above/below the table/desk, it should be slightly stronger/more durable. The makerworld link is here: https://makerworld.com/en/models/490503#profileId-403926

For remixing: It adds to the free standing foot to be able to be clamped to the side of a table. Part of it has more solid to be stronger.

…..-----===== FROM ORIGINAL MODEL PAGE =====-----…..

Attach a “free-standing foot” to your Multiboard so it stands by itself, and use it as a desk organizer.

The free-standing foot comes with two pieces: the foot and the support piece.

To set it up, you insert the foot into a hole on the bottom of your Multiboard, then you place the support piece inside the foot to secure it into place.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io