Puzzle Box Lid - Maleficent

This is a custom lid that works with the base of my puzzle gift box which can be found here:
https://makerworld.com/en/models/446736#profileId-353234

I wanted a way to be able to gift or sell puzzles, but for that person to know what the puzzle should look like when they put it together. So this is a 100x100mm Hueforge built into the lid of my puzzle gift box. The bottom of the box will easily hold a puzzle that is 200x200mm.

You can find the Maleficent puzzle here:
https://makerworld.com/en/models/490035#profileId-403365

As well as my other puzzles and lids in this puzzle collection here:
https://makerworld.com/@CanadianGamer/collections/988102

***IMPORTANT***

If you slice my print profile you may get a warning about floating regions. You can ignore this, its due to the fact that we transition from 10% infill to 100% infill in the model.

My print profile for this lid has built in adaptive layers, so the lid itself will print with 10% infill at 0.2mm layer heights, but when it starts to print the hueforge topper, it will switch to 100% infill at 0.08mm layer heights. The Colour swaps are built into my print profile.

If you slice the STL yourself, you will need to set up the file and are responsible for your layer heights, colour swaps, and infill.

Maleficent Puzzle Box Lid - Printing Instructions

Start with Black

At 3.24mm swap to Purple

At 3.96mm swap to Silver

At 4.20mm swap to Ivory White for the rest

---------------------------------------------------------------------------------------------------------------------

Commercial license's to sell my prints are available on my Patreon:

https://www.patreon.com/CanadianGamer3DPrintsEDM

As part of your membership you will also have access to exclusive files available only on Patreon.

---------------------------------------------------------------------------------------------------------------------