I made this with Hueforge

CardCaptor Sakura Magic Circle

Project: cardcaptor sakura circle.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 199.99x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Scarlet Red
At layer #21 (1.76mm) swap to Sakura Pink
At layer #25 (2.08mm) swap to Lemon Yellow for the rest.