Groot - 4 & 6 Colour Versions - Hueforge
Groot - 4 & 6 Colour Versions - Hueforge
Print Profile(2)
Description
Groot - Marvel Hueforge
There are two profiles available. One is 4 colours and the other is 6 colours, I have shown the completed picture of each. The 3MF is built for you to use your choice, but if you download the STL you need to follow the correct instructions below.
You can find the pictured Rocket Racoon Hueforge in my comic collection here:
https://makerworld.com/@CanadianGamer/collections/549689
-----------------------------------
The pictured Frame is a friction Fit design here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475
You may see a floating regions error. You can ignore this error.
In my print profile I have used a height range modifier (HRM), which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
4 COLOUR - Printing Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Generic Black
PLA BambuLab Matte Dark Brown
PLA BambuLab Matte Latte Brown
PLA BambuLab Matte Ivory White
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Dark Brown
At layer #15 (1.28mm) swap to Latte Brown
At layer #23 (1.92mm) swap to Ivory White for the rest.
------------------------------------------------------------------
6 COLOUR - Printing Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Basic BambuLab Green
PLA BambuLab Matte Dark Brown
PLA Bambu Matte Dark Green
PLA BambuLab Matte Latte Brown
PLA BambuLab Matte Ivory White
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to BambuLab Green
At layer #10 (0.88mm) swap to Dark Brown
At layer #13 (1.12mm) swap to Matte Dark Green
At layer #15 (1.28mm) swap to Latte Brown
At layer #23 (1.92mm) swap to Ivory White for the rest.
---------------------------------------------------------------------------------------------------------------------
Commercial license's to sell my prints are available on my Patreon:
https://www.patreon.com/CanadianGamer3DPrintsEDM
As part of your membership you will also have access to exclusive files available only on Patreon.
---------------------------------------------------------------------------------------------------------------------
Comment & Rating (4)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
