Another “Art Deco” Hueforge : this time it's Wall-E , everyone's favorite cleaner robot :)

The dimensions are 180x180 mm so it fits nicely in a square frame.

You can print frames that are compatible with my “Art Deco” Hueforges via this link :

https://makerworld.com/en/models/194571

There are 2 versions, a 6 color and a 4 color version

Colors Used :

6 Color Version :

Black → Blue → Red → Orange → Yellow → White

4 Color

Black → Red → Yellow → White

I changed the thickness of the base layer, now it's 1 mm, this creates a much stronger/durable end result.

I added a Height Range Modifier so that first 1mm gets printed at 0.2 layer height (instead of 0.04). This also results in a faster print result.

I also removed the Prime Tower , it isn't really needed for Hueforges

For people who want to slice the files manually, please use thing settings (with all layers being 0.04). You do NOT need to do this if you download my BambuStudio 3MF file, only when you use the STL

6 Color Version :

Swap Instructions:
Start with Black
At layer #30 (1.2mm) swap to Blue
At layer #33 (1.32mm) swap to Red
At layer #36 (1.44mm) swap to Orange
At layer #42 (1.68mm) swap to Yellow
At layer #50 (2mm) swap to White for the rest.
 

4 Color Version :

Swap Instructions:
Start with Black
At layer #31 (1.24mm) swap to Red
At layer #35 (1.4mm) swap to Yellow
At layer #47 (1.88mm) swap to Jade White for the rest.

Reminder : I design and share these works for free. If you like my work a Boost on Makerworld is always appreciated! 

If you want to support my work & creativity you could join my Patreon : https://www.patreon.com/3deekes