This is an adapter for the https://www.manfrotto.com/global/pocket-support-large-black-mp3-bk pocket size tripod. I am using 2 of these for my Totem split keyboard.

I created this because I was really NOT going to pay 35 euros on some pieces of aluminum from SplitKB.

The hardware needed is:

• M2.5 heat inserts from CNC Kitchen(you can use others that have the same specs)
• some flat headed 12mm M2.5 screws
• some M2.5 screws for mounting the bottom part of the puck

It allows 8 positions with the exterior holes.

The mounting to the keyboard is made with the interior 4 holes:

I used on a TOTEM keyboard:

Details for the mounting holes necessary for the bottom part of the puck: