Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 104.88x146.52mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Matte Dark Blue Transmission Distance: 0.1
PLA BambuLab Basic Blue Transmission Distance: 2.4
PLA BambuLab Matte Ice Blue Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5.9
This print uses 5 unique filaments

Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Dark Blue
At layer #16 (1.36mm) swap to Blue
At layer #20 (1.68mm) swap to Ice Blue
At layer #21 (1.76mm) swap to Jade White for the rest.