Charizard 151 Pokemon Card - Hueforge
Charizard 151 Pokemon Card - Hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 104.88x146.52mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.4mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Basic Red Transmission Distance: 4.1
PLA BambuLab Basic Orange Transmission Distance: 5.8
PLA BambuLab Basic Yellow Transmission Distance: 5.9
PLA BambuLab Basic Jade White Transmission Distance: 5.9
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Red
At layer #18 (1.52mm) swap to Orange
At layer #20 (1.68mm) swap to Yellow
At layer #23 (1.92mm) swap to Jade White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
