If you want a cool effect substitute the Gray for another color. Other colors might look pretty cool. It'll be nice to see some others prints of this one with other colors.

Project: Deadpool peice 1 Hueforge.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
If changing size . . . only change X and Y, not Z.

The Model is 200x198.89mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Gray Transmission Distance: 2 (substitute for any cool accent color you like. Green, Blue, pink, ect.)
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #24 (2mm) swap to Black
At layer #30 (2.48mm) swap to Gray (substitute for any cool accent color you like. Green, Blue, pink, ect.)
At layer #36 (2.96mm) swap to White for the rest.