Do you find yourself digging through piles of electronics, PCBs, and various bits and pieces in your drawers or storage containers? Let's put an end to the clutter with Gridfinity!

Check out my newest addition: A 1x2x3 Gridfinity Arduino Pro Micro storage bin. It's just the right size to comfortably organize up to 10 Arduino Pro Micros. I've had to make the slots rather tight to fit 10 boards into a single bin. Depending on the board's tolerances, the fit might be very tight. I will also upload another model with five slightly wider slots to address this issue.

The model supports friction-mounted 6x2mm magnets.

My preferred printer settings:

• Material: Bambu PLA on a Textured PEI Plate
• Presets: 0.20mm Standard
• Walls: 3
• Infill: 13% Gyroid pattern

You can tweak the wall thickness and infill to use less material, but these settings gave me the most even-looking print.

Please share any thoughts or suggestions on this model. I always appreciate your feedback!

My other designs:

Please take a look at my other designs, too. If you can't find what you need, just let me know. I'm here to help fill in the gaps in the collection for you.

Happy Printing!

Gridfinity by Zack Freedman: https://www.youtube.com/watch?v=ra_9zU-mnl8