JURASSIC WORLD
JURASSIC WORLD
Print Profile(1)
Description
Os dejo una imagen hecha con Hueforge del logo de Jurassic World personalizado.
Instrucciones para imprimir (configurar perfil bambu PLA con boquilla de 0.4 siguiendo las instrucciones):
Project: JURASSIC.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 200x153.01mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.3mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Smartfil RE Negro Transmission Distance: 0.8
PLA Sakata 870 Plata Transmission Distance: 1.8
PLA Smartfil RE Blanco Transmission Distance: 5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
This print uses 4 unique filaments
Swap Instructions:
Start with Negro
At layer #7 (0.68mm) swap to Plata
At layer #12 (1.08mm) swap to Blanco
At layer #14 (1.24mm) swap to Plata
At layer #17 (1.48mm) swap to Blanco
At layer #19 (1.64mm) swap to BambuLab Green
At layer #21 (1.8mm) swap to Plata
At layer #25 (2.12mm) swap to Blanco for the rest.
Espero que os guste!!
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
