Hueforge de Perceval et Karadoc, “On en à gros”.
Instructions
Can be rescaled just remember not to change the Z axis.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.2mm in size
Filaments Used:
PLA Generic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 1
PLA Generic White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.