Parrot - Red/Orange and Blue/Green Print Profiles
Parrot - Red/Orange and Blue/Green Print Profiles
Print Profile(2)
Description
Parrot Hueforge
The rest of my Animal Collection can be found here:
https://makerworld.com/@CanadianGamer/collections/549661
Update: June 14, 2024 - I added a Blue/Green/Yellow colour palette print profile.
-----------------------------------
If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available. https://www.patreon.com/CanadianGamer3DPrintsEDM
The pictured Frame is a friction Fit design here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475
Something that Bambu has done in the last update has made hueforge designs give a floating regions error. You can ignore this error.
In my print profile I have used a height range modifier (HRM), which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
And if you scale it down, I have frames for 150x150 or 100x100 here:
https://makerworld.com/en/models/173529#profileId-190705
Please post a picture of your printed copy! I'd love to see it!
— Printing Instructions---
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA BambuLab Matte Scarlet Red Transmission Distance: 3.1
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 4
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Scarlet Red
At layer #16 (1.36mm) swap to Orange
At layer #19 (1.6mm) swap to Yellow
At layer #22 (1.84mm) swap to Ivory White for the rest.
Comment & Rating (6)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
