GPS GY-GPS6MV2 MODULE CASE NEO-6M
GPS GY-GPS6MV2 MODULE CASE NEO-6M
Print Profile(1)
Description
The module allows you to add GPS support in a microcontroller system (eg Arduino ), and the built-in NEO-6M system gives great possibilities and ensures high precision of measurement. The module has a built-in cell supporting RTC clock settings.
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs.
Properties
- GPS system: U-blox NEO-6M
- Transmission type: UART (lines Rx, Tx)
- Received band: L1 (1575.42MHz)
- Positioning efficiency: 3 m on average
- Drift: <0.02 m / s
- Reference system: WGS-84
- Maximum height: 18.000 m
- Maximum speed: 515 m / s
- Acceleration: <4g
- Tracking sensitivity: -161 dBm
- Sensitivity of acquisition: -148 dBm
- Average time of "cold start": 38 seconds
- The average "warm start" time is 35 s
- Hot start time: 1 sec
- Average recovery time: 0.1s
- Working temperature range: -40 ° C to + 80 ° C
- Power supply range: from +3.5 V to +5.5 V
- Bus voltage UART: 3.3 V
- The soldering points allow the antenna to be mounted on the PCB
- Built-in RTC backup battery
- Built-in u.FL connector for antenna
- Module dimensions (without antenna): 36 x 26 x 4 mm
- Dimensions of the antenna: 25 x 25 x 8 mm
Give me a like and follow my page.
If you need help or you want to be printed this parts or customized in different way, just send me a message here.
Thank you to support me and happy printing.
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
