modular and with optional magnets to lock into position
this is a modular design that consists of:
base (use of 4mmx2mm magnets optional)
main insert · 3 options
secondary insert · optional
pen holder (use of 4mmx2mm magnets optional)
phone holder with storage compartment (use of 4mmx2mm magnets optional)
airpods pro insert · optional
If you choose to, you'll need 6 4x2mm magnets to achieve the same result as shown in the pictures, as well as some drops of super glue to ensure they really stay in their position and don't get pulled away from the slot.
notes
please make sure that you are very mindful of the polarities of the magnet when assembling and gluing in their spots as you want to make sure that each section atracts and not repels the one that will sit above/below
inserts are designed with small tolerances to ensure a perfect tight fit, so make sure that you have your machine calibrated and filament dry so that you don't run into any tolerance issues
sorry, I don’t have an a1 mini to customize accordingly, I would recommend that you open the 3mf in bambustudio > select your printer and then try scaling it down until it fits your bed size, to not scale down too much you can also try to print each element diagonally
I haven’t tried scaling down myself, hope it goes well for you!