Son Goku - Dragon Ball GT - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x296.9mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.5mm

Filaments Used:
- PLA BambuLab Matte Charcoal Transmission Distance: 0.6
- PLA BambuLab Basic Blue Gray Transmission Distance: 3
- PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
- PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
- PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 5 unique filaments

Swap Instructions:
- Start with Charcoal
- At layer #10 (0.88mm) swap to Blue Gray
- At layer #11 (0.96mm) swap to Marine Blue
- At layer #13 (1.12mm) swap to Ice Blue
- At layer #15 (1.44mm) swap to Ivory White for the rest.