Portable 9x9 Gomoku/Go
The pieces have three sides, and you can change the state of the piece by flipping it.
This is a set of flip Go. Each piece has three sides, and the state of the piece can be changed by flipping it.
One problem I encountered during testing was that the black and white sides are larger in volume, so they are also heavier.
When switching to the black and white sides, the uneven weight on both sides of the axis can easily cause tilting.
Therefore, it is particularly important to maintain the balance of weight on both sides of the middle axis when the pieces are on any side.
My solution is to increase the weight of the side without pieces in the slicing settings and reduce the number of walls and infill on the black and white sides.
After multiple tests, a relatively balanced effect has been achieved. You can download the configuration file and print it directly.
It is strongly recommended that you do not export my model to STL and then slice it yourself to print, otherwise you may also encounter the problem of uneven weight of the pieces, unless you are patient enough to do several tests.
A 13-way version will be uploaded later. If you have a version you like, you can leave a message.
Due to the large number of moving structures, it is recommended to use good consumables.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)